Magimix Kitchen Appliances , with Free Delivery on all orders over £100 (UK Mainland)

Trade Customer? Login Here

USING A MAGIMIX

Click on a section below

ASSEMBLING THE COMPACT & CUISINE SYSTEME
TAKING THE COMPACT & CUISINE SYSTEME APART
CLEANING - COMPACT & CUISINE SYSTEME
HOW TO WORK THE MAGIMIX
FUNDAMENTAL RULES


ASSEMBLING THE COMPACT & CUISINE SYSTEME

Bowl
Place the bowl on the motor housing with the handle to the right hand side. The keyholes in the bottom rim should locate over the lugs on the motor housing (for Cuisine Systeme only).

 Turn the bowl anti-clockwise as far as it will go making sure it firmly locks in position.

Mini-Bowl
Slide the mini-bowl down onto the motor spindle.

 Place the mini-bowl blade onto the motor spindle.
Put on the lid with the feed tube to the left of the handle. The locking mechanism should engage with the lip on the bowl. Applying gentle downward pressure, turn the lid anti-clockwise (as far as it will go) until locked in position. The bowl is now also locked in place.

NOTE: With a little practice you will soon become familiar with the lid locking mechanism which is designed specifically for your safety. For the first few operations some components may be tight fitting.

Knives
Place the double-bladed knife onto the motor spindle.

 Place the dough blade onto the motor spindle.

Lock the lid in position by turning it anti-clockwise as far as it will go.
IMPORTANT: When not in use do not leave the lid in the locked position.

Discs
Place the disc support onto the motor spindle. It is now in place. When fitting a disc handle it with great care as the edges are very sharp.
To Slice: Place the disc with its slicing edge uppermost firmly onto the disc support. To Grate: Place the disc with its cutting edges uppermost firmly onto the disc support.

For extra safety always hold discs by the rim away from the blades.

French/Stir Fry Disc
This is an optional extra (except with the CS 5100). Fit the disc support and with the cutting edges uppermost, place the disc firmly onto it.

 Lock the lid in place by turning it anti-clockwise as far as it will go.

Egg whisk
Place the egg whisk onto the motor spindle.

Position the raised white plastic point within the feed tube and turn the whole lid anti-clockwise as far as it will go until it is firmly locked into position. Make sure you remove the pusher for maximum air.

[ Back to Top ]

TAKING THE COMPACT & CUISINE SYSTEME APART

Mini-Bowl (optional on Compact 2100)
Stop the motor and remove the lid
by turning it clockwise before lifting
it off.

You can then lift out the mini-bowl and blade Take care when handling the blade, it is sharp.

Knives
Having removed the lid, remove the bowl, again by turning it clockwise to release the catch. Remove the blade by lifting it out.

Egg whisk
The egg whisk can be removed in the same way.

Discs
Take care when removing the slicing and grating discs.

Do not forget to remove the disc support.

[ Back to Top ]

CLEANING - COMPACT & CUISINE SYSTEME

To easily clean the main blade remove the cap. Do this by holding the blade on a flat surface and pushing the top of the cap with the thumb. To re-assemble just click the cap back into place.

The prongs of the spatula can help to clean awkward corners.

The high quality discs are extremely sharp. Take care when handling them, it is better to hold them by the edges where possible.

Do not put the motor unit into water. Clean it with a damp cloth. Take care to keep the switch mechanism on the motor unit clean.

The whole egg whisk comes apart for easy cleaning.

The blade, spindle and top should then be re-assembled and stored together in the storage box.

The blades and discs can be washed in the dishwasher, also the bowl; lid and mini-bowl can be washed in the dishwasher but will deteriorate over a period of time. It is normal that these items will become marked and possibly opaque with frequent use. This normal deterioration is not covered by guarantee.

[ Back to Top ]



[ Back to Top ]



[ Back to Top ]